问题描述:
英语翻译
英译汉:
If multiple network interfaces are attached to a single network,each interface must have a unique IP address.
Prior to AIX 5.1,if you configured multiple network interfaces on the same network,only the first interface you configured would have a route to the network in the IP routing table.This means that all outgoing IP traffic would go through that interface only,not any of the other interfaces on that network.Although it is possible to use this configuration to load-balance incoming traffic,it is not a recommended configuration prior to AIX 5.1.
In AIX 5.1 and above,the Multipath Routing feature allows routes to be added to the IP routing table for multipath interfaces on the same subnet.This allows outgoing traffic to alternate between the interfaces rather than being sent through one interface only.
英译汉:
If multiple network interfaces are attached to a single network,each interface must have a unique IP address.
Prior to AIX 5.1,if you configured multiple network interfaces on the same network,only the first interface you configured would have a route to the network in the IP routing table.This means that all outgoing IP traffic would go through that interface only,not any of the other interfaces on that network.Although it is possible to use this configuration to load-balance incoming traffic,it is not a recommended configuration prior to AIX 5.1.
In AIX 5.1 and above,the Multipath Routing feature allows routes to be added to the IP routing table for multipath interfaces on the same subnet.This allows outgoing traffic to alternate between the interfaces rather than being sent through one interface only.
问题解答:
我来补答展开全文阅读