问题描述：
英语翻译
1.Bracelet Design and Outlay.
2． charging
The Bluetooth bracelet comes with a built in rechargeable battery.Before using the bracelet for the first time please charge the battery fully (Approximately 6 hour charge)
2.1 How to charge
To charge the bracelet please plug the appropriate end in to the bracelet charge port on the bracelet and the USB end either into a computer or the wall adapter provided.
2.2 Normal Charging Time
The bracelet will normally take 2 hours charge from completely flat.When the battery is fully charged the bracelet will automatically stop charging.
2.3 Charge Indication
The LED light will be solid red when battery is charging.Once the battery is fully charged the light will turn off .
2.4 Standby time
Up to 60 hours standby time,note that the stand by time is effected by how often the bracelet vibrates and flashes.
2.5 Low Battery Notification
When the battery is running low the LED will blink red and the bracelet will beep/vibrate once a minute.When this occurs please charge the bracelet to ensure greater battery life.
3.Turning the Bracelet OFF/ON
To turn the bracelet on old down the main btton for 2 seconds until the LED flashes.To turn the bracelet off hold the main button down until the LED turns off.
4.Prairing Bracelet with phone
To pair the bracelet with your phone:
Keep bracelet within 1 metre of your phone
Ensure bracelet is turned off to begin
Hold the main button down for 4 seconds until the LED light starts flashing green and red.
Search for the device on your phone,it will come up with the name “Bracelet”
Press yes to pair the device.
It will then ask for a pass code enter “0000”
Press yes to connect the device and authorise it .
The bracelet should now be paired with your phone.
5.Linking Bracelet with phone
When the bracelet is turned back on,depending on your phone it should re-link automatically.
To re-link the bracelet with the phone manually go to the Bluetooth menu on your phone select the bracelet in thin list and choose the connect with device option.Ensure that your bracelet is now turned on .You may have to re-enter the pass code.
6.Bracelet Operation
The bracelet will vibrate and the LED will flash blue when you have an incoming call.
7.To Reset Bracelet
You may want to reset the bracelet back to the original factory settings,this function clears all current pairings with bracelet:
Ensure that bracelet is switched of
Continually keep pressing the main button until LED flashes blue and red .
Release the main button
Hold main button until it buzzes 2 times.
Connect the power charge cable to the bracelet and charge for a few seconds.
The bracelet will now turn off and all parings have been cleared.
1.Bracelet Design and Outlay.
2． charging
The Bluetooth bracelet comes with a built in rechargeable battery.Before using the bracelet for the first time please charge the battery fully (Approximately 6 hour charge)
2.1 How to charge
To charge the bracelet please plug the appropriate end in to the bracelet charge port on the bracelet and the USB end either into a computer or the wall adapter provided.
2.2 Normal Charging Time
The bracelet will normally take 2 hours charge from completely flat.When the battery is fully charged the bracelet will automatically stop charging.
2.3 Charge Indication
The LED light will be solid red when battery is charging.Once the battery is fully charged the light will turn off .
2.4 Standby time
Up to 60 hours standby time,note that the stand by time is effected by how often the bracelet vibrates and flashes.
2.5 Low Battery Notification
When the battery is running low the LED will blink red and the bracelet will beep/vibrate once a minute.When this occurs please charge the bracelet to ensure greater battery life.
3.Turning the Bracelet OFF/ON
To turn the bracelet on old down the main btton for 2 seconds until the LED flashes.To turn the bracelet off hold the main button down until the LED turns off.
4.Prairing Bracelet with phone
To pair the bracelet with your phone:
Keep bracelet within 1 metre of your phone
Ensure bracelet is turned off to begin
Hold the main button down for 4 seconds until the LED light starts flashing green and red.
Search for the device on your phone,it will come up with the name “Bracelet”
Press yes to pair the device.
It will then ask for a pass code enter “0000”
Press yes to connect the device and authorise it .
The bracelet should now be paired with your phone.
5.Linking Bracelet with phone
When the bracelet is turned back on,depending on your phone it should re-link automatically.
To re-link the bracelet with the phone manually go to the Bluetooth menu on your phone select the bracelet in thin list and choose the connect with device option.Ensure that your bracelet is now turned on .You may have to re-enter the pass code.
6.Bracelet Operation
The bracelet will vibrate and the LED will flash blue when you have an incoming call.
7.To Reset Bracelet
You may want to reset the bracelet back to the original factory settings,this function clears all current pairings with bracelet:
Ensure that bracelet is switched of
Continually keep pressing the main button until LED flashes blue and red .
Release the main button
Hold main button until it buzzes 2 times.
Connect the power charge cable to the bracelet and charge for a few seconds.
The bracelet will now turn off and all parings have been cleared.
问题解答：
我来补答展开全文阅读