问题描述：
英语翻译
下面的文章哪位热心的大哥帮忙翻译成中文,
1.boot up your pc with windows
2.start pro/e setup
3.open ptc_licfile.dat with your fav txt-editor
4.replace every occurance of 00-00-00-00-00-00 with the one shown in the bottom left corner of the Pro/e setup
(its your mac-id,format:xx-xx-xx-xx-xx)
5.install pro/e - pro/m - pro/ds,i dont care which one or in which order
6.on license-config screen select "nodelocked license" and point to edited ptc_licfile.dat
7.blalala install
next for pro/engineer:
(if u didnt install the complete package,u get "missing file" errors,accept or bleed)
1.run ptc.pro engineer.wildfire.4.0-patch.exe,point to \i486_nt\obj folder
2.edit \bin\proev.bat
change "%start_cmd% "%CGTECH_JRE%\bin\javaw" -Xms16m -Xmx64m -Xss4m -classpath "%CGTECH_CLASSES%;%CGTECH_CLASSES%\CGTech.jar" Vericut %argstr%" in
"%start_cmd% "%CGTECH_JRE%\bin\javaw" -Xms16m -Xmx64m -Xss4m -classpath "%CGTECH_CLASSES%;%CGTECH_CLASSES%\CGTech.jar" Vericut %argstr% PTC_KEY=0"
(add PTC_KEY=0)
pro/mechanica:
1.run ptc.pro mechanica.wildfire.4.0-patch.exe
2.point to \i486_nt\bin
\i486_nt\obj
\i486_nt\ptc
(in this order,after every "missing file" error)
pro/distributed services:
1.Run ptc.distributed.services.4.0-patch.exe and point to \i486_nt\obj
Fun Have Team SHooTERS and Oddity
不过希望有人能人工翻译一下，
下面的文章哪位热心的大哥帮忙翻译成中文,
1.boot up your pc with windows
2.start pro/e setup
3.open ptc_licfile.dat with your fav txt-editor
4.replace every occurance of 00-00-00-00-00-00 with the one shown in the bottom left corner of the Pro/e setup
(its your mac-id,format:xx-xx-xx-xx-xx)
5.install pro/e - pro/m - pro/ds,i dont care which one or in which order
6.on license-config screen select "nodelocked license" and point to edited ptc_licfile.dat
7.blalala install
next for pro/engineer:
(if u didnt install the complete package,u get "missing file" errors,accept or bleed)
1.run ptc.pro engineer.wildfire.4.0-patch.exe,point to \i486_nt\obj folder
2.edit \bin\proev.bat
change "%start_cmd% "%CGTECH_JRE%\bin\javaw" -Xms16m -Xmx64m -Xss4m -classpath "%CGTECH_CLASSES%;%CGTECH_CLASSES%\CGTech.jar" Vericut %argstr%" in
"%start_cmd% "%CGTECH_JRE%\bin\javaw" -Xms16m -Xmx64m -Xss4m -classpath "%CGTECH_CLASSES%;%CGTECH_CLASSES%\CGTech.jar" Vericut %argstr% PTC_KEY=0"
(add PTC_KEY=0)
pro/mechanica:
1.run ptc.pro mechanica.wildfire.4.0-patch.exe
2.point to \i486_nt\bin
\i486_nt\obj
\i486_nt\ptc
(in this order,after every "missing file" error)
pro/distributed services:
1.Run ptc.distributed.services.4.0-patch.exe and point to \i486_nt\obj
Fun Have Team SHooTERS and Oddity
不过希望有人能人工翻译一下，
问题解答：
我来补答展开全文阅读