问题描述：
英语翻译
File MH46120 Page T2-1 of 2 Issued:2007-10-25
New:2010-07-07
TEST RECORD NO.2
GENERAL:
This Test Record covers the addition of PC surface to the Recognition of “LABEL-T20-100WPF”.
The test results reported relate only to the items tested.
SAMPLES:
Samples of the products as indicated below,were submitted by the manufacturer for examination and test.The individual material layers and thicknesses were examined to ascertain that they were constructed as described in this Report.
The manufacturer furnished samples of “LABEL-T20-100WPF” label printed with Shenzhen Caihe Printing Ink Science And Technology Co.,Ltd,type “MB SERIES” in Letterpress printing in black,red,yellow and blue inks.
Smooth,flat,and rigid test panels were provided by UL.
EXPOSURE CONDITIONS (USR):UL 969 METHOD
The following exposures were conducted.
Exposures Paragraph
Standard Atmosphere 7.1.1
Water Immersion 7.1.1
Elevated Temperature 7.1.1
TESTS:
The following tests were conducted.
Test Paragraph
Construction Review 4.2
Visual Examination 4.1
Legibility Test 4.1
Adhesion Test 4.1
The test methods and results of the above exposures and tests have been reviewed and found in accordance with the requirements.
File MH46120 Page T2-2 of 2 Issued:2007-10-25
New:2010-07-07
For original data,see Test Record Supplement T2,Datasheet-1.
Test Record Summary:
The results of this investigation,including construction review and testing,indicate that the products evaluated comply with the applicable requirements in UL 969,“Standard for Marking and Labeling Systems”,Fourth Edition,Revised November 24,2008,and therefore,such products are judged eligible to bear UL’s Mark as described on the Conclusion Page of this Report.Any information and documentation involving UL Mark services are provided on behalf of Underwriters Laboratories Inc.(UL) or any authorized licensee of UL.
Report by Reviewed by
ECHO DU SUSAN LIANG
Engineer Project Engineer
JANET MA
Engineer
File MH46120 Page T2-1 of 2 Issued:2007-10-25
New:2010-07-07
TEST RECORD NO.2
GENERAL:
This Test Record covers the addition of PC surface to the Recognition of “LABEL-T20-100WPF”.
The test results reported relate only to the items tested.
SAMPLES:
Samples of the products as indicated below,were submitted by the manufacturer for examination and test.The individual material layers and thicknesses were examined to ascertain that they were constructed as described in this Report.
The manufacturer furnished samples of “LABEL-T20-100WPF” label printed with Shenzhen Caihe Printing Ink Science And Technology Co.,Ltd,type “MB SERIES” in Letterpress printing in black,red,yellow and blue inks.
Smooth,flat,and rigid test panels were provided by UL.
EXPOSURE CONDITIONS (USR):UL 969 METHOD
The following exposures were conducted.
Exposures Paragraph
Standard Atmosphere 7.1.1
Water Immersion 7.1.1
Elevated Temperature 7.1.1
TESTS:
The following tests were conducted.
Test Paragraph
Construction Review 4.2
Visual Examination 4.1
Legibility Test 4.1
Adhesion Test 4.1
The test methods and results of the above exposures and tests have been reviewed and found in accordance with the requirements.
File MH46120 Page T2-2 of 2 Issued:2007-10-25
New:2010-07-07
For original data,see Test Record Supplement T2,Datasheet-1.
Test Record Summary:
The results of this investigation,including construction review and testing,indicate that the products evaluated comply with the applicable requirements in UL 969,“Standard for Marking and Labeling Systems”,Fourth Edition,Revised November 24,2008,and therefore,such products are judged eligible to bear UL’s Mark as described on the Conclusion Page of this Report.Any information and documentation involving UL Mark services are provided on behalf of Underwriters Laboratories Inc.(UL) or any authorized licensee of UL.
Report by Reviewed by
ECHO DU SUSAN LIANG
Engineer Project Engineer
JANET MA
Engineer
问题解答：
我来补答展开全文阅读